Your current position:
Homepage
/
/
/
High-capacity air constant temp. bath
1/1
Number of views:
1000
MR-2540A

High-capacity air constant temp. bath

The MR-2540A high capacity air constant temperature. bath produced by AIKOM company is specially designed for constant temperature control and temperature coefficient testing of high-grade bridge standard resistors in electrical and temperature laboratories. It adopts a large door cover and a small door opening design, and can accommodate a 19 inch chassis size standard instrument. It is a precision standard resistor for high-grade bridges and an essential constant temperature equipment that is not suitable for immersion standards.
  • Product Description

    The MR-2540A high capacity air constant temperature. bath produced by AIKOM company is specially designed for constant temperature control and temperature coefficient testing of high-grade bridge standard resistors in electrical and temperature laboratories. It adopts a large door cover and a small door opening design, and can accommodate a 19 inch chassis size standard instrument. It is a precision standard resistor for high-grade bridges and an essential constant temperature equipment that is not suitable for immersion standards.

  • Application areas

    Used as a standard air resistance and battery constant temperature for electrical and temperature measurement of high-level bridges. It can be set to 23℃ for temp. control, with a temperature rise or fall of plus or minus 15℃ for measuring the temperature coefficient of resistance.

  • Product characteristics

    ●Large capacity design can accommodate multiple sets of standard resistors and standard instruments with a 19 inch chassis size.
    ●The upper sealing cover is designed with a large compartment door cover and a small compartment door, making it convenient for users to place various sizes of standard containers.
    ●Has excellent anti-interference ability, avoiding situations where AC bridge measurement is prone to interference.
    ●The upper instrument sealing cover is equipped with a large diameter outlet for easy wiring by users.
    ●Real time display of temperature/humidity curve on a 3.5-inch touch screen, with ten programmable digital high-performance temp. controller for fully automatic temperature control, achieving rate temperature control.
    ●Equipped with 2 sets of electrical signal penetrations for the extraction of electrical signals and data interfaces, facilitating data measurement.
    ●Equipped with dehumidification function to prevent high humidity from affecting measurement accuracy.
    ●Optional humidification function, testing the impact of temperature/humidity on electronic devices, and other tests.

  • Specificatiom

    Working temperature:  5℃~50℃
    Working humidity:  Below ambient humidity 20%
    Working medium:  Antifreeze
    Working area:  About 570x570x400mm
    Cooling mode:  Built-in refrigeratory
    Heating modes:  By electric heater
    Dehumidification method:  Refrigerator dehumidification
    Temp. control mode:  Full digital PID control
    Display resolution:  0.01℃
    Stability:  ±0.02℃/30mins
    Display accuracy:  ±0.05℃ (After calibration)
    Temperature uniformity:  0.3℃ (15℃~30℃)
    Temperature change rate:  0.03℃/min
    Heating up time:  About 0.5hr (20℃~40℃)
    Cooling time:  About 1hr (20℃~10℃)
    Working voltage:  220VAC±10%, 50Hz
    Nominal power:  About 1700W
    Size:  About 676x740x892mm
    Weight:  About 100Kg

  • Product Warranty

    Warranty period of 12 months, free warranty or replacement in case of quality defects.

  • After-sale service

    Free information exchange platform technical support, operational answers or video tips, paid maintenance services.

  • Environmental impact

  • optional accessories

    Options:

Product Description
Application areas
Product characteristics
Specificatiom
Product Warranty
After-sale service
Environmental impact
optional accessories

The MR-2540A high capacity air constant temperature. bath produced by AIKOM company is specially designed for constant temperature control and temperature coefficient testing of high-grade bridge standard resistors in electrical and temperature laboratories. It adopts a large door cover and a small door opening design, and can accommodate a 19 inch chassis size standard instrument. It is a precision standard resistor for high-grade bridges and an essential constant temperature equipment that is not suitable for immersion standards.

Used as a standard air resistance and battery constant temperature for electrical and temperature measurement of high-level bridges. It can be set to 23℃ for temp. control, with a temperature rise or fall of plus or minus 15℃ for measuring the temperature coefficient of resistance.

●Large capacity design can accommodate multiple sets of standard resistors and standard instruments with a 19 inch chassis size.
●The upper sealing cover is designed with a large compartment door cover and a small compartment door, making it convenient for users to place various sizes of standard containers.
●Has excellent anti-interference ability, avoiding situations where AC bridge measurement is prone to interference.
●The upper instrument sealing cover is equipped with a large diameter outlet for easy wiring by users.
●Real time display of temperature/humidity curve on a 3.5-inch touch screen, with ten programmable digital high-performance temp. controller for fully automatic temperature control, achieving rate temperature control.
●Equipped with 2 sets of electrical signal penetrations for the extraction of electrical signals and data interfaces, facilitating data measurement.
●Equipped with dehumidification function to prevent high humidity from affecting measurement accuracy.
●Optional humidification function, testing the impact of temperature/humidity on electronic devices, and other tests.

Working temperature:  5℃~50℃
Working humidity:  Below ambient humidity 20%
Working medium:  Antifreeze
Working area:  About 570x570x400mm
Cooling mode:  Built-in refrigeratory
Heating modes:  By electric heater
Dehumidification method:  Refrigerator dehumidification
Temp. control mode:  Full digital PID control
Display resolution:  0.01℃
Stability:  ±0.02℃/30mins
Display accuracy:  ±0.05℃ (After calibration)
Temperature uniformity:  0.3℃ (15℃~30℃)
Temperature change rate:  0.03℃/min
Heating up time:  About 0.5hr (20℃~40℃)
Cooling time:  About 1hr (20℃~10℃)
Working voltage:  220VAC±10%, 50Hz
Nominal power:  About 1700W
Size:  About 676x740x892mm
Weight:  About 100Kg

Warranty period of 12 months, free warranty or replacement in case of quality defects.

Free information exchange platform technical support, operational answers or video tips, paid maintenance services.

Options:

Related product recommendation

产品中心
Intelligent temperature sensor verification and calibration system
Intelligent temperature sensor verification and calibration system
The system adopts multiple innovative technological achievements, and its software and hardware comply with the national temperature calibration regulations. It is independently developed by AIKOM company and has fully independent intellectual property rights, making the maintenance and upgrading of the system easier. The system has the characteristics of advanced design, reasonable structure, complete software functions, convenient operation, strong anti-interference ability, and flexible configuration. It can make the time-consuming and laborious temperature calibration work easy and effortless.
Aneroid barometer visual calibration system
Aneroid barometer visual calibration system
The automatic visual recognition verification system for empty box barometers is developed by AIKOM company specifically for verifying empty box barometers. An automatic control and calibration system composed of hardware units such as computers, atmospheric pressure/temperature calibration devices, visual automatic recognition devices, automatic position finding control devices, automatic lighting assistance devices, and professional software, as well as the calibration and calibration of atmospheric pressure gauges. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "JJG 272-2007 Aneroid Barometer & Aneroid Barograph", achieving functions such as automatic temperature control, automatic pressure rise and fall, automatic pressure control, automatic verification/calibration, automatic photo storage, automatic calculation results, and automatic printing reports.
Calibration system for top-oil/winding temp. measuring equipment of oil transform
Calibration system for top-oil/winding temp. measuring equipment of oil transform
The calibration system for the oil level/winding temperature controller of the main transformer is specially developed by AIKOM company for the temperature measurement device of power transformers. It consists of hardware units such as a computer, a constant temperature bath, a standard thermometer, and a secondary electrical measuring device, as well as professional software. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "DL/T 1400-2015 Calibration specification for local temperature measuringequipment of oil transformer". The entire calibration process only requires the inspector to manually input the temperature bulb wiring and temperature controller readings, while the rest is completed by a computer, such as automatic temperature control, calibration, data processing, calculation, printing reports, and other functions.
Calibration system for measurement and test norm of Thermostatic bath
Calibration system for measurement and test norm of Thermostatic bath's metrological characteristics
The constant temperature bath testing system is designed specifically for testing the technical performance of the constant temperature bath. It is an automatic control and verification software composed of hardware units such as a computer, constant temperature bath, standard platinum resistance thermometer, precision two channel standard platinum resistance thermometer, and professional software. Developed independently by AIKOM, the fluctuation and uniformity of the constant temperature bath are automatically tested in strict accordance with the "JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath Metrological Characteristics". During the entire verification process, only the verifier needs to change the position of the verification point, and the rest are automatically controlled, verified, and processed by the computer. The results are calculated and judged to be qualified, and the test certificate is output
上一页
1
2
17
Online customer service
Customer service hotline
0755-83762498 0755-83762498
Service time:
8:00 - 24:00
Customer service group:
Online Service
QQ:
QQ