Your current position:
Homepage
/
/
/
Desktop constant temp. oil bath
1/1
Number of views:
1055
MR-5015A

Desktop constant temp. oil bath

The MR-5015A portable standard resistance and battery thermostatic oil bath produced by AIKOM is specially designed for the constant temperature control and temperature coefficient test of the standard resistance of high-class electric bridge for electrical and temperature experiments. It adopts the company's unique jet mixing patent technology, with ultra-low vibration and silence, and is a necessary thermostatic equipment for the precision standard resistance of high-class electric bridge
  • Product Description

    The MR-5015A desktop constant temp. oil bath produced by AIKOM company is specially designed for constant temperature control and temperature coefficient testing of high-grade bridge standard resistors in electrical and temperature experiments. It adopts our company's unique jet stirring patented technology, with ultra-low vibration and silence, and is an essential constant temperature equipment for high-grade bridge precision standard resistors.

  • Application areas

    High grade bridge standard resistance constant temperature for electrical and temperature measurement. A set of standard resistors (9 pieces) or 1 transition resistor can be placed, and a temperature control of 20℃ can be set, with a temp. rise or fall of plus or minus 10℃ used to measure the temperature coefficient of the standard resistor. The oil temperature can be heated to remove water from the oil and increase the insulation resistance value.

  • Product characteristics

    Adopting jet mixing technology, precise PID temperature controller can achieve rate temperature control, with excellent temperature field uniformity.
    Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor bath temperature
    Equipped with an independent over-temperature protection system to prevent damage to the tested equipment caused by overtemperature.
    Equipped with adjustable height brackets, it is convenient for users to adjust the height according to the inspected needs.
    Small size, light weight, and low noise.

  • Specificatiom

    Display range:  -10℃∼120℃
    Working temperature:  5℃∼60℃
    Working medium:  Marcol 52
    Working area:  Length: 300mm
                             Width: 300mm
                             Depth: 280mm
    Liquid volume:  About 35L
    Stirring mode:  Ejector mixing, 3 speeds
    Cooling mode:  Built-in refrigeratory
    Heating modes:  By electric heater
    Temp. control mode:  Full digital PID control
    Display resolution:  0.001℃
    Stability:  0.004℃/10mins
    Display accuracy:  ±0.002℃ (After cal. at 20℃)
    Horizontal temp. field:  0.005℃ (at 20℃)
    Vertical temp. field:  0.005℃ (at 20℃)
    Heating up time:  About 1hr (20℃∼60℃)
    Cooling time:  About 1hr (30℃∼20℃)
    Working voltage:  220VAC±10%, 50Hz
    Nominal power:  About 1200W
    Size:  About 400x630x420mm
    Weight:  About 40Kg

  • Product Warranty

    Warranty period of 12 months, free warranty or replacement in case of quality defects.

  • After-sale service

    Free information exchange platform technical support, operational answers or video tips, paid maintenance services.

  • Environmental impact

    Use green refrigerant, compliance with world environmental protection agreement.

  • optional accessories

    Options:

Product Description
Application areas
Product characteristics
Specificatiom
Product Warranty
After-sale service
Environmental impact
optional accessories

The MR-5015A desktop constant temp. oil bath produced by AIKOM company is specially designed for constant temperature control and temperature coefficient testing of high-grade bridge standard resistors in electrical and temperature experiments. It adopts our company's unique jet stirring patented technology, with ultra-low vibration and silence, and is an essential constant temperature equipment for high-grade bridge precision standard resistors.

High grade bridge standard resistance constant temperature for electrical and temperature measurement. A set of standard resistors (9 pieces) or 1 transition resistor can be placed, and a temperature control of 20℃ can be set, with a temp. rise or fall of plus or minus 10℃ used to measure the temperature coefficient of the standard resistor. The oil temperature can be heated to remove water from the oil and increase the insulation resistance value.

Adopting jet mixing technology, precise PID temperature controller can achieve rate temperature control, with excellent temperature field uniformity.
Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor bath temperature
Equipped with an independent over-temperature protection system to prevent damage to the tested equipment caused by overtemperature.
Equipped with adjustable height brackets, it is convenient for users to adjust the height according to the inspected needs.
Small size, light weight, and low noise.

Display range:  -10℃∼120℃
Working temperature:  5℃∼60℃
Working medium:  Marcol 52
Working area:  Length: 300mm
                         Width: 300mm
                         Depth: 280mm
Liquid volume:  About 35L
Stirring mode:  Ejector mixing, 3 speeds
Cooling mode:  Built-in refrigeratory
Heating modes:  By electric heater
Temp. control mode:  Full digital PID control
Display resolution:  0.001℃
Stability:  0.004℃/10mins
Display accuracy:  ±0.002℃ (After cal. at 20℃)
Horizontal temp. field:  0.005℃ (at 20℃)
Vertical temp. field:  0.005℃ (at 20℃)
Heating up time:  About 1hr (20℃∼60℃)
Cooling time:  About 1hr (30℃∼20℃)
Working voltage:  220VAC±10%, 50Hz
Nominal power:  About 1200W
Size:  About 400x630x420mm
Weight:  About 40Kg

Warranty period of 12 months, free warranty or replacement in case of quality defects.

Free information exchange platform technical support, operational answers or video tips, paid maintenance services.

Use green refrigerant, compliance with world environmental protection agreement.

Options:

Related product recommendation

产品中心
Intelligent temperature sensor verification and calibration system
Intelligent temperature sensor verification and calibration system
The system adopts multiple innovative technological achievements, and its software and hardware comply with the national temperature calibration regulations. It is independently developed by AIKOM company and has fully independent intellectual property rights, making the maintenance and upgrading of the system easier. The system has the characteristics of advanced design, reasonable structure, complete software functions, convenient operation, strong anti-interference ability, and flexible configuration. It can make the time-consuming and laborious temperature calibration work easy and effortless.
Aneroid barometer visual calibration system
Aneroid barometer visual calibration system
The automatic visual recognition verification system for empty box barometers is developed by AIKOM company specifically for verifying empty box barometers. An automatic control and calibration system composed of hardware units such as computers, atmospheric pressure/temperature calibration devices, visual automatic recognition devices, automatic position finding control devices, automatic lighting assistance devices, and professional software, as well as the calibration and calibration of atmospheric pressure gauges. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "JJG 272-2007 Aneroid Barometer & Aneroid Barograph", achieving functions such as automatic temperature control, automatic pressure rise and fall, automatic pressure control, automatic verification/calibration, automatic photo storage, automatic calculation results, and automatic printing reports.
Calibration system for top-oil/winding temp. measuring equipment of oil transform
Calibration system for top-oil/winding temp. measuring equipment of oil transform
The calibration system for the oil level/winding temperature controller of the main transformer is specially developed by AIKOM company for the temperature measurement device of power transformers. It consists of hardware units such as a computer, a constant temperature bath, a standard thermometer, and a secondary electrical measuring device, as well as professional software. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "DL/T 1400-2015 Calibration specification for local temperature measuringequipment of oil transformer". The entire calibration process only requires the inspector to manually input the temperature bulb wiring and temperature controller readings, while the rest is completed by a computer, such as automatic temperature control, calibration, data processing, calculation, printing reports, and other functions.
Calibration system for measurement and test norm of Thermostatic bath
Calibration system for measurement and test norm of Thermostatic bath's metrological characteristics
The constant temperature bath testing system is designed specifically for testing the technical performance of the constant temperature bath. It is an automatic control and verification software composed of hardware units such as a computer, constant temperature bath, standard platinum resistance thermometer, precision two channel standard platinum resistance thermometer, and professional software. Developed independently by AIKOM, the fluctuation and uniformity of the constant temperature bath are automatically tested in strict accordance with the "JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath Metrological Characteristics". During the entire verification process, only the verifier needs to change the position of the verification point, and the rest are automatically controlled, verified, and processed by the computer. The results are calculated and judged to be qualified, and the test certificate is output
上一页
1
2
17
Online customer service
Customer service hotline
0755-83762498 0755-83762498
Service time:
8:00 - 24:00
Customer service group:
Online Service
QQ:
QQ