Your current position:
Homepage
/
/
/
Multi-function medium temp. dry-well calibrator
1/1
Number of views:
1024
PD-4480

Multi-function medium temp. dry-well calibrator

The PD-4480 multi function medium temp. dry well calibrator is manufactured by AIKOM company using a large-diameter metal tank process. By preparing uniform temperature sleeves to measure the maintenance, inspection, and on-site calibration of temperature sensors of different types and diameters, it can also be used for comparison and calibration of short branch thermometers in the laboratory.
  • Product Description

    The PD-4480 multi function medium temp. dry well calibrator is manufactured by AIKOM company using a large-diameter metal tank process. By preparing uniform temperature sleeves to measure the maintenance, inspection, and on-site calibration of temperature sensors of different types and diameters, it can also be used for comparison and calibration of short branch thermometers in the laboratory.

  • Application areas

    Suitable for checking and calibrating various intermediate temperature sensors, direct reading local temperature meters, various temperature switch settings, and comparing and verifying on-site temperature probes; It can be used for comparison and calibration of short branch thermometers in the laboratory, as well as for the reproduction and preservation of small zinc, tin, and indium fixed points, providing a stable temperature field environment

  • Product characteristics

    ●Adopting dual output proportional PID heating control and mouth heat release compensation, it has excellent temperature field uniformity.
    ●Ten segment programmable digital high-performance temperature controller fully automatic temperature control
    ●Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor tank temperature
    ●Complete software and hardware over temperature protection function to prevent equipment damage caused by over temperature
    ●Real time display of temperature curve on 3.5-inch touch screen, user-friendly humanmachine interface
    ●Support for dual channel electrical param-eter measurement (optional additional function)
    ●Small and portable design, convenient for outdoor and on-site use
    ●A small indium, tin, and zinc solidification point device can be formed by preparing a slot core temperature equalization sleeve
    ●Equipped with movable 4-hole x Φ20mm and fixed 5-hole x Φ8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs

  • Specificatiom

    Working temperature: 50℃~450℃
    Working medium: Air
    Working area: Diam 63mm (4xΦ20mm)
                           Depth 200mm
    Cooling mode: Natural cooling
    Heating modes: By electric heater
    Display resolution:  0.01℃ 
    Display accuracy:  ±0.3℃ (Built in probe)
                                 ±0.1℃  (External standard probe)
    Stability:  ±0.02℃/10min
    Temp. difference between holes:  0.15℃
    Axial temperature field:  0.2℃ (40mm within)
                                            1.5℃ (150mm within)
    Thermometer insertion depth:  200mm
    Heating up time:  About 1hr (25℃~400℃)
    Cooling time:  About 2hr (400℃~100℃)
    Stability time:  About 10mins
    Temperature unit:  ℃/℉ optional
    Temp. control mode:  Full digital PID control
    Working voltage:  220VAC±10%, 50Hz
    Nominal power:  About 600W
    Size:  About 170x230x350mm
    Weight:  About 12.5Kg

  • Product Warranty

    The warranty period is 12 months. In case of quality defects, the warranty or replacement is free of charge.

  • After-sale service

    Free information exchange platform technical support, operation answers or video prompts, paid maintenance services.

  • Environmental impact

    Meet environmental requirements.

  • optional accessories

    Options:

    ​​​​​​​

Product Description
Application areas
Product characteristics
Specificatiom
Product Warranty
After-sale service
Environmental impact
optional accessories

The PD-4480 multi function medium temp. dry well calibrator is manufactured by AIKOM company using a large-diameter metal tank process. By preparing uniform temperature sleeves to measure the maintenance, inspection, and on-site calibration of temperature sensors of different types and diameters, it can also be used for comparison and calibration of short branch thermometers in the laboratory.

Suitable for checking and calibrating various intermediate temperature sensors, direct reading local temperature meters, various temperature switch settings, and comparing and verifying on-site temperature probes; It can be used for comparison and calibration of short branch thermometers in the laboratory, as well as for the reproduction and preservation of small zinc, tin, and indium fixed points, providing a stable temperature field environment

●Adopting dual output proportional PID heating control and mouth heat release compensation, it has excellent temperature field uniformity.
●Ten segment programmable digital high-performance temperature controller fully automatic temperature control
●Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor tank temperature
●Complete software and hardware over temperature protection function to prevent equipment damage caused by over temperature
●Real time display of temperature curve on 3.5-inch touch screen, user-friendly humanmachine interface
●Support for dual channel electrical param-eter measurement (optional additional function)
●Small and portable design, convenient for outdoor and on-site use
●A small indium, tin, and zinc solidification point device can be formed by preparing a slot core temperature equalization sleeve
●Equipped with movable 4-hole x Φ20mm and fixed 5-hole x Φ8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs

Working temperature: 50℃~450℃
Working medium: Air
Working area: Diam 63mm (4xΦ20mm)
                       Depth 200mm
Cooling mode: Natural cooling
Heating modes: By electric heater
Display resolution:  0.01℃ 
Display accuracy:  ±0.3℃ (Built in probe)
                             ±0.1℃  (External standard probe)
Stability:  ±0.02℃/10min
Temp. difference between holes:  0.15℃
Axial temperature field:  0.2℃ (40mm within)
                                        1.5℃ (150mm within)
Thermometer insertion depth:  200mm
Heating up time:  About 1hr (25℃~400℃)
Cooling time:  About 2hr (400℃~100℃)
Stability time:  About 10mins
Temperature unit:  ℃/℉ optional
Temp. control mode:  Full digital PID control
Working voltage:  220VAC±10%, 50Hz
Nominal power:  About 600W
Size:  About 170x230x350mm
Weight:  About 12.5Kg

The warranty period is 12 months. In case of quality defects, the warranty or replacement is free of charge.

Free information exchange platform technical support, operation answers or video prompts, paid maintenance services.

Meet environmental requirements.

Options:

​​​​​​​

Related product recommendation

产品中心
Intelligent temperature sensor verification and calibration system
Intelligent temperature sensor verification and calibration system
The system adopts multiple innovative technological achievements, and its software and hardware comply with the national temperature calibration regulations. It is independently developed by AIKOM company and has fully independent intellectual property rights, making the maintenance and upgrading of the system easier. The system has the characteristics of advanced design, reasonable structure, complete software functions, convenient operation, strong anti-interference ability, and flexible configuration. It can make the time-consuming and laborious temperature calibration work easy and effortless.
Aneroid barometer visual calibration system
Aneroid barometer visual calibration system
The automatic visual recognition verification system for empty box barometers is developed by AIKOM company specifically for verifying empty box barometers. An automatic control and calibration system composed of hardware units such as computers, atmospheric pressure/temperature calibration devices, visual automatic recognition devices, automatic position finding control devices, automatic lighting assistance devices, and professional software, as well as the calibration and calibration of atmospheric pressure gauges. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "JJG 272-2007 Aneroid Barometer & Aneroid Barograph", achieving functions such as automatic temperature control, automatic pressure rise and fall, automatic pressure control, automatic verification/calibration, automatic photo storage, automatic calculation results, and automatic printing reports.
Calibration system for top-oil/winding temp. measuring equipment of oil transform
Calibration system for top-oil/winding temp. measuring equipment of oil transform
The calibration system for the oil level/winding temperature controller of the main transformer is specially developed by AIKOM company for the temperature measurement device of power transformers. It consists of hardware units such as a computer, a constant temperature bath, a standard thermometer, and a secondary electrical measuring device, as well as professional software. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "DL/T 1400-2015 Calibration specification for local temperature measuringequipment of oil transformer". The entire calibration process only requires the inspector to manually input the temperature bulb wiring and temperature controller readings, while the rest is completed by a computer, such as automatic temperature control, calibration, data processing, calculation, printing reports, and other functions.
Calibration system for measurement and test norm of Thermostatic bath
Calibration system for measurement and test norm of Thermostatic bath's metrological characteristics
The constant temperature bath testing system is designed specifically for testing the technical performance of the constant temperature bath. It is an automatic control and verification software composed of hardware units such as a computer, constant temperature bath, standard platinum resistance thermometer, precision two channel standard platinum resistance thermometer, and professional software. Developed independently by AIKOM, the fluctuation and uniformity of the constant temperature bath are automatically tested in strict accordance with the "JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath Metrological Characteristics". During the entire verification process, only the verifier needs to change the position of the verification point, and the rest are automatically controlled, verified, and processed by the computer. The results are calculated and judged to be qualified, and the test certificate is output
上一页
1
2
17
Online customer service
Customer service hotline
0755-83762498 0755-83762498
Service time:
8:00 - 24:00
Customer service group:
Online Service
QQ:
QQ