Your current position:
Homepage
/
/
/
Multi-function ultra low temp. dry-well Calibrator
1/1
Number of views:
1034
PD-3070

Multi-function ultra low temp. dry-well Calibrator

The PD-3070 multi function Ultra low temp. dry well calibrator produced by AIKOM company is a new generation of multifunctional and miniaturized temperature calibration source series products developed on the basis of portable PD-3010 intelligent dry body temperature calibrator. By preparing uniform temperature sleeves, it is suitable for various low-temperature temperature sensors, as well as temperature sensors with insertion depths up to 200mm, direct reading local temperature gauges, and various temperature switches for maintenance, inspection, and on-site calibration. It can also be used for comparison and calibration of short branch thermometers in laboratories.
  • Product Description

    The PD-3070 multi function Ultra low temp. dry well calibrator produced by AIKOM company is a new generation of multifunctional and miniaturized temperature calibration source series products developed on the basis of portable PD-3010 intelligent dry body temperature calibrator. By preparing uniform temperature sleeves, it is suitable for various low-temperature temperature sensors, as well as temperature sensors with insertion depths up to 200mm, direct reading local temperature gauges, and various temperature switches for maintenance, inspection, and on-site calibration. It can also be used for comparison and calibration of short branch thermometers in laboratories.

  • Application areas

    Suitable for checking and calibrating various deep and low temperature sensors, direct reading local temperature gauges, various temperature switch settings, and comparing and verifying on-site temperature probes; Can be used for comparison and calibration of short branch thermometers in the laboratory.

  • Product characteristics

    ●Adopting bipolar refrigeration, the low temperature can reach -45℃ below the ambient temperature.
    ●Adopting dual output proportional PID heating and temperature control, mouth heat release compensation, with excellent temperature field uniformity.
    ●Ten programmable digital high-performance temperature controllers for fully automatic temperature control.
    ●Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor bath temperature.
    ●Complete software and hardware over temperature protection function to prevent equipment damage caused by over temperature.
    ●Real time display of temperature curve on 3.5-inch touch screen, user-friendly humanmachine interface.
    ●Support for dual channel electrical parameter measurement (optional additional functions).
    ●Small and portable design, convenient for outdoor and on-site use.
    ●Equipped with 8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs.

  • Specificatiom

    Working temperature:  -45℃~125℃
    Working medium:  Air, Antifreeze, Silicone oil (50cst)
    Working area:  Diam 30/24mm
                             Depth 200mm
    Cooling mode:  Semiconductor refrigeration
    Heating modes:  Semiconductor heating
    Display resolution:  0.001℃ 
    Display accuracy:  ±0.18℃ (Built in probe)
                                 ±0.04℃ (External standard probe)
    Stability:  ±0.002℃/10min
    Temp. difference between holes:  0.02℃
    Axial temperature field:  0.05℃
    Thermometer insertion depth:  180mm
    Heating up time:  About 20mins (25℃~155℃)
    Cooling time:  About 25mins (25℃~-40℃)
    Stability time:  About 8mins
    Temperature unit:  ℃/℉ optional
    Temp. control mode:  Full digital PID control
    Working voltage:  220VAC±10%, 50Hz
    Nominal power:  About 360W
    Size:  About 170x230x350mm
    Weight:  About 13Kg

  • Product Warranty

    The warranty period is 12 months. In case of quality defects, the warranty or replacement is free of charge

  • After-sale service

    Free information exchange platform technical support, operation answers or video prompts, paid maintenance services

  • Environmental impact

    Meet environmental requirements

  • optional accessories

    Options:


Product Description
Application areas
Product characteristics
Specificatiom
Product Warranty
After-sale service
Environmental impact
optional accessories

The PD-3070 multi function Ultra low temp. dry well calibrator produced by AIKOM company is a new generation of multifunctional and miniaturized temperature calibration source series products developed on the basis of portable PD-3010 intelligent dry body temperature calibrator. By preparing uniform temperature sleeves, it is suitable for various low-temperature temperature sensors, as well as temperature sensors with insertion depths up to 200mm, direct reading local temperature gauges, and various temperature switches for maintenance, inspection, and on-site calibration. It can also be used for comparison and calibration of short branch thermometers in laboratories.

Suitable for checking and calibrating various deep and low temperature sensors, direct reading local temperature gauges, various temperature switch settings, and comparing and verifying on-site temperature probes; Can be used for comparison and calibration of short branch thermometers in the laboratory.

●Adopting bipolar refrigeration, the low temperature can reach -45℃ below the ambient temperature.
●Adopting dual output proportional PID heating and temperature control, mouth heat release compensation, with excellent temperature field uniformity.
●Ten programmable digital high-performance temperature controllers for fully automatic temperature control.
●Built in standard platinum resistance thermometer temperature measurement digital display function, which can be connected to standard platinum resistance thermometer to monitor bath temperature.
●Complete software and hardware over temperature protection function to prevent equipment damage caused by over temperature.
●Real time display of temperature curve on 3.5-inch touch screen, user-friendly humanmachine interface.
●Support for dual channel electrical parameter measurement (optional additional functions).
●Small and portable design, convenient for outdoor and on-site use.
●Equipped with 8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs.

Working temperature:  -45℃~125℃
Working medium:  Air, Antifreeze, Silicone oil (50cst)
Working area:  Diam 30/24mm
                         Depth 200mm
Cooling mode:  Semiconductor refrigeration
Heating modes:  Semiconductor heating
Display resolution:  0.001℃ 
Display accuracy:  ±0.18℃ (Built in probe)
                             ±0.04℃ (External standard probe)
Stability:  ±0.002℃/10min
Temp. difference between holes:  0.02℃
Axial temperature field:  0.05℃
Thermometer insertion depth:  180mm
Heating up time:  About 20mins (25℃~155℃)
Cooling time:  About 25mins (25℃~-40℃)
Stability time:  About 8mins
Temperature unit:  ℃/℉ optional
Temp. control mode:  Full digital PID control
Working voltage:  220VAC±10%, 50Hz
Nominal power:  About 360W
Size:  About 170x230x350mm
Weight:  About 13Kg

The warranty period is 12 months. In case of quality defects, the warranty or replacement is free of charge

Free information exchange platform technical support, operation answers or video prompts, paid maintenance services

Meet environmental requirements

Options:


Related product recommendation

产品中心
Intelligent temperature sensor verification and calibration system
Intelligent temperature sensor verification and calibration system
The system adopts multiple innovative technological achievements, and its software and hardware comply with the national temperature calibration regulations. It is independently developed by AIKOM company and has fully independent intellectual property rights, making the maintenance and upgrading of the system easier. The system has the characteristics of advanced design, reasonable structure, complete software functions, convenient operation, strong anti-interference ability, and flexible configuration. It can make the time-consuming and laborious temperature calibration work easy and effortless.
Aneroid barometer visual calibration system
Aneroid barometer visual calibration system
The automatic visual recognition verification system for empty box barometers is developed by AIKOM company specifically for verifying empty box barometers. An automatic control and calibration system composed of hardware units such as computers, atmospheric pressure/temperature calibration devices, visual automatic recognition devices, automatic position finding control devices, automatic lighting assistance devices, and professional software, as well as the calibration and calibration of atmospheric pressure gauges. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "JJG 272-2007 Aneroid Barometer & Aneroid Barograph", achieving functions such as automatic temperature control, automatic pressure rise and fall, automatic pressure control, automatic verification/calibration, automatic photo storage, automatic calculation results, and automatic printing reports.
Calibration system for top-oil/winding temp. measuring equipment of oil transform
Calibration system for top-oil/winding temp. measuring equipment of oil transform
The calibration system for the oil level/winding temperature controller of the main transformer is specially developed by AIKOM company for the temperature measurement device of power transformers. It consists of hardware units such as a computer, a constant temperature bath, a standard thermometer, and a secondary electrical measuring device, as well as professional software. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "DL/T 1400-2015 Calibration specification for local temperature measuringequipment of oil transformer". The entire calibration process only requires the inspector to manually input the temperature bulb wiring and temperature controller readings, while the rest is completed by a computer, such as automatic temperature control, calibration, data processing, calculation, printing reports, and other functions.
Calibration system for measurement and test norm of Thermostatic bath
Calibration system for measurement and test norm of Thermostatic bath's metrological characteristics
The constant temperature bath testing system is designed specifically for testing the technical performance of the constant temperature bath. It is an automatic control and verification software composed of hardware units such as a computer, constant temperature bath, standard platinum resistance thermometer, precision two channel standard platinum resistance thermometer, and professional software. Developed independently by AIKOM, the fluctuation and uniformity of the constant temperature bath are automatically tested in strict accordance with the "JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath Metrological Characteristics". During the entire verification process, only the verifier needs to change the position of the verification point, and the rest are automatically controlled, verified, and processed by the computer. The results are calculated and judged to be qualified, and the test certificate is output
上一页
1
2
17
Online customer service
Customer service hotline
0755-83762498 0755-83762498
Service time:
8:00 - 24:00
Customer service group:
Online Service
QQ:
QQ