Your current position:
Homepage
/
/
/
Economic medium temp. dry-well calibrator
1/1
Number of views:
1035
PD-2400

Economic medium temp. dry-well calibrator

The PD-2400 economic medium temperature dry well calibrator is an extended medium temperature model developed by AIKOM company based on the design of AC and DC dual power supply. It is the first time that the design and application of conical heat transfer sleeve and tank middle section heating, upper cooling, and bottom insulation are adopted on this model; It also has a sales history of nearly 20 years.
  • Product Description

    The PD-2400 economic medium temperature dry well calibrator is an extended medium temperature model developed by AIKOM company based on the design of AC and DC dual power supply. It is the first time that the design and application of conical heat transfer sleeve and tank middle section heating, upper cooling, and bottom insulation are adopted on this model; It also has a sales history of nearly 20 years.

  • Application areas

    Suitable for the calibration, inspection and on-site maintenance of various temperature sensors, direct reading local temperature meters, and temperature switches, as well as the comparison and calibration of short branch temperature probes, as well as the calibration and maintenance of industrial on-site temperature control systems; Suitable for laboratory temperature calibration at the same time.

  • Product characteristics

    ●Small and portable, easy to operate, economical and practical.
    ●Use a conical uniform temperature sleeve to avoid dust and debris entering the tank, causing the sleeve to get stuck.
    ●High temperature up to 400℃, using strong speed air cooling, with fast cooling function at high temperatures.
    ●Customizable temperature equalization sleeves with different pore sizes or porous specifications, suitable for sensors with different diameters.
    ●AC/DC dual power supply mode, AC 220V or DC 24V power supply.
    ●Equipped with precise PID controller, it can achieve rate temperature control.
    ●Equipped with 8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs.

  • Specificatiom

    Display range:  0℃~410℃
    Working temperature:  50℃~400℃
    Working medium:  Air
    Thermometer insertion depth:  160mm
    Working area:  Diam 16mm
                            Depth 160mm
    Cooling mode:  Fan air cooling
    Heating modes:  Low voltage heating rod heating
    Temp. control mode:  Full digital PID control
    Display resolution:  0.01℃ 
    Display accuracy:  ±0.5℃ (400℃ after cal.)
    Stability:  ±0.02℃/10min
    Heating up time:  About 35mins (25℃~400℃)
    Cooling time:  About 30mins (400℃~50℃)
    Stability time:  About 10mins
    Temperature unit:  ℃/℉ optional
    Working voltage:  220VAC±10%, 50Hz
                                 24V/7AH battery-powered
    Nominal power:  About 330W
    Size:  About 268x125x256mm
    Weight:  About 7.5Kg

  • Product Warranty

    Warranty period of 12 months, free warranty or replacement in case of quality defects

  • After-sale service

    Free information exchange platform technical support, operational answers or video tips, paid maintenance services

  • Environmental impact

    Comply with environmental requirements

  • optional accessories

    Options:

Product Description
Application areas
Product characteristics
Specificatiom
Product Warranty
After-sale service
Environmental impact
optional accessories

The PD-2400 economic medium temperature dry well calibrator is an extended medium temperature model developed by AIKOM company based on the design of AC and DC dual power supply. It is the first time that the design and application of conical heat transfer sleeve and tank middle section heating, upper cooling, and bottom insulation are adopted on this model; It also has a sales history of nearly 20 years.

Suitable for the calibration, inspection and on-site maintenance of various temperature sensors, direct reading local temperature meters, and temperature switches, as well as the comparison and calibration of short branch temperature probes, as well as the calibration and maintenance of industrial on-site temperature control systems; Suitable for laboratory temperature calibration at the same time.

●Small and portable, easy to operate, economical and practical.
●Use a conical uniform temperature sleeve to avoid dust and debris entering the tank, causing the sleeve to get stuck.
●High temperature up to 400℃, using strong speed air cooling, with fast cooling function at high temperatures.
●Customizable temperature equalization sleeves with different pore sizes or porous specifications, suitable for sensors with different diameters.
●AC/DC dual power supply mode, AC 220V or DC 24V power supply.
●Equipped with precise PID controller, it can achieve rate temperature control.
●Equipped with 8mm single hole casing, can also be customized with different pore sizes or porous specifications for uniform temperature casing according to needs.

Display range:  0℃~410℃
Working temperature:  50℃~400℃
Working medium:  Air
Thermometer insertion depth:  160mm
Working area:  Diam 16mm
                        Depth 160mm
Cooling mode:  Fan air cooling
Heating modes:  Low voltage heating rod heating
Temp. control mode:  Full digital PID control
Display resolution:  0.01℃ 
Display accuracy:  ±0.5℃ (400℃ after cal.)
Stability:  ±0.02℃/10min
Heating up time:  About 35mins (25℃~400℃)
Cooling time:  About 30mins (400℃~50℃)
Stability time:  About 10mins
Temperature unit:  ℃/℉ optional
Working voltage:  220VAC±10%, 50Hz
                             24V/7AH battery-powered
Nominal power:  About 330W
Size:  About 268x125x256mm
Weight:  About 7.5Kg

Warranty period of 12 months, free warranty or replacement in case of quality defects

Free information exchange platform technical support, operational answers or video tips, paid maintenance services

Comply with environmental requirements

Options:

Related product recommendation

产品中心
Intelligent temperature sensor verification and calibration system
Intelligent temperature sensor verification and calibration system
The system adopts multiple innovative technological achievements, and its software and hardware comply with the national temperature calibration regulations. It is independently developed by AIKOM company and has fully independent intellectual property rights, making the maintenance and upgrading of the system easier. The system has the characteristics of advanced design, reasonable structure, complete software functions, convenient operation, strong anti-interference ability, and flexible configuration. It can make the time-consuming and laborious temperature calibration work easy and effortless.
Aneroid barometer visual calibration system
Aneroid barometer visual calibration system
The automatic visual recognition verification system for empty box barometers is developed by AIKOM company specifically for verifying empty box barometers. An automatic control and calibration system composed of hardware units such as computers, atmospheric pressure/temperature calibration devices, visual automatic recognition devices, automatic position finding control devices, automatic lighting assistance devices, and professional software, as well as the calibration and calibration of atmospheric pressure gauges. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "JJG 272-2007 Aneroid Barometer & Aneroid Barograph", achieving functions such as automatic temperature control, automatic pressure rise and fall, automatic pressure control, automatic verification/calibration, automatic photo storage, automatic calculation results, and automatic printing reports.
Calibration system for top-oil/winding temp. measuring equipment of oil transform
Calibration system for top-oil/winding temp. measuring equipment of oil transform
The calibration system for the oil level/winding temperature controller of the main transformer is specially developed by AIKOM company for the temperature measurement device of power transformers. It consists of hardware units such as a computer, a constant temperature bath, a standard thermometer, and a secondary electrical measuring device, as well as professional software. Developed independently by AIKOM company and possessing independent intellectual property rights, it is applicable to the "DL/T 1400-2015 Calibration specification for local temperature measuringequipment of oil transformer". The entire calibration process only requires the inspector to manually input the temperature bulb wiring and temperature controller readings, while the rest is completed by a computer, such as automatic temperature control, calibration, data processing, calculation, printing reports, and other functions.
Calibration system for measurement and test norm of Thermostatic bath
Calibration system for measurement and test norm of Thermostatic bath's metrological characteristics
The constant temperature bath testing system is designed specifically for testing the technical performance of the constant temperature bath. It is an automatic control and verification software composed of hardware units such as a computer, constant temperature bath, standard platinum resistance thermometer, precision two channel standard platinum resistance thermometer, and professional software. Developed independently by AIKOM, the fluctuation and uniformity of the constant temperature bath are automatically tested in strict accordance with the "JJF 1030-2010 Measurement and Test Norm of Thermostatic Bath Metrological Characteristics". During the entire verification process, only the verifier needs to change the position of the verification point, and the rest are automatically controlled, verified, and processed by the computer. The results are calculated and judged to be qualified, and the test certificate is output
上一页
1
2
17
Online customer service
Customer service hotline
0755-83762498 0755-83762498
Service time:
8:00 - 24:00
Customer service group:
Online Service
QQ:
QQ